Controller of automatic pH which adds acid to maintain stable the selected value. PH measurement is performed continuously, pumping the bottle of pH - when it is necessary. It includes peristaltic pump, tube, solution and support wall. Excludes plug.
This equipment is designed and prepared for regular irrigation water a required pH level, whatever the desired parameter. In this way and totally automatic and independently, to be responsible for dosed product in proportion to the need through a simple prior regulation, which we will indicate the level that we want to keep in water tank.
1 x controller pH Kontrol 01 (Cable 2, 7 M)
1 x tube (1.6 M Cable)
1 x wall support, adhesive, taco and screw
1 x vacuum cleaner
1 x valve fuel transfer
1 x pot of solution
2 x 4 meters silicone tubes
Food 90÷265 VAC
Display 4 digits 7-segment
Bnc connector for the probe pH
Switch 3 positions: Cebado, ON and Stand by
Peristaltic pump with digital regulation of the time and the speed of dosing.
Measure pH range: 4÷8 (sensitivity: 0.1 pH)
Dosage ON-OFF (adjustable adjustment point) method
PH calibration method: 1 point