Lumatek 1000w Electronic Digital Lighting Ballast

Lumatek 1000w Electronic Digital Lighting Ballast

Reduced price!
RS0326

€ 260.00

€ 325.00

-€ 65.00

- +

No reward points for this product because there's already a discount.


 
More info

Small, compact and quiet, these ballasts are able to distribute more light with less power consumption. The potentiometer can select the total consumption between 250W or 400W (400W ballast) or between 400W and 600W (600W ballast) and a power boost mode for each selection (super lumen).

 

 

 

Ultralight and easy to assemble. Compatible with any type of bulb market. The ballast controller adjusts the light emission to suit specific needs. The ballast comes with a 4-phase controller that allows you to set the output to 250W / 400W ballasts 400W and 400W / 600W 600W ballasts. It also allows to go beyond a high performance mode (super lumen) that can take up to 10% more lumens the bulb in each of the operating modes.

The Lumatek electronic ballast produces up to 20% more light output (lumens) than standard core-coil (magnetic) while using less electricity. More light equals more yield. Test data has shown that a digital Lumatek 600W produces only 5% less than one usable light traditional 1000W. Not degrade and remain effective throughout his life. With the passage of time the coil usually give off a strong magnetism, produce less light, emit more heat and use more electricity.

Features:

   *Completely silent (no humming - no vibration)
   *No moving parts - produces less heat
   *The resin liner is to protect long life components
   *Soft start technology - lamps last three times longer
   *Waterproof - sealed from the inside
   *Fast startup - reaches full brightness in under a minute
   *Without fans - ensures reliability
   *Fully interchangeable - Turns both HPS and MH bulbs
   *Auto power circuit breaker if
   *Rubber feet for lower airflow

Caution:super lumen mode make sure the lamp works continued for 10 minutes before changing modes. The rapid change of modes may damage the lamp.


400W, features:
Electronic ballast for 400W HPS or MH. No audible noise, no flicker
Voltage:230V 50/60Hz
Current:1.80A
Input power:415W
Output power:400W
Power factor:> 0.99
Voltage range:165 ~ 265V
THD:<8%
Lamp CCF: <1.7
Operating Freq.:high frequency
Env. temp.:-25 ~ 50 ° C (-13 ~ 52 ° F)
Enclosure temp. sise (Dt):29 ° C (84.2 ° F)
Env.IP require:> IP23


600W, features:
Electronic ballast for 600W HPS lamp. No audible noise, no flicker
Voltage:230V 50/60Hz
Current:2.70a
Intput power:620W
Output power:600W
Power factor:> 0.99
Voltage range:165 to 265V
THD:<8%
Lamp CCF:<1.7
Operating frequency:high frequency
Environment temperature:-25 To 50 ° C (-13 to 52 ° F)
Enclosure temperature rise (Dt):35 ° C (95 ° F)
Environment IP requires:

> IP23

9 other products in the same category:

No products

To be determined Shipping
€ 0.00 Total

Check out